Delta Straight Lever Satin Chrome Latch Door Handles
Delta satin chrome straight lever latch handle on a plain backplate. Used on doors that have a mortice latch and are NOT required to lock with a key. This minimalistic door handle would suit contemporary properties favouring strong lines and sharp edge designs. These handles should be fitted in conjunction with a York tubular latch, see related items below. The backplate measures 157x43mm and this set is supplied complete with connecting spindle and fixing screws.
Lever latch handles have a plain back plate. They are used in conjunction with either a mortice or tubular latch, which are normally 2.1/2in (64mm) or 3in (75mm) long, although longer sizes can be obtained if the handles need to be placed further in from the door edge. The latch is fitted into the edge of the door whereas the handles are fitted to either side of the door and are connected by a spindle located in the back of the levers. When the levers are pressed, the spindle rotates and operates the latch allowing the door to open. The handles are supplied complete with the spindle and fixing screws, but not with the latch, which needs to be purchased as a separate item, and is normally specified to have a matching finish to the handles.
| Price Unit | pair |
|---|---|
| Model | DEL6010SC |
| SKU | I436182 |
| Dimensions | Overall Back Plate Dimensions 157x43mm Lever Length 126mm Overall Projection 52mm Back Plate Thickness 11mm Approximate dimensions subject to change by the manufacturer, please contact us if this information is critical. |
| Manufacturer | M.Marcus |
